Quantcast
700 Tenere High Fender Kit Install – Camel ADV Products

1 (833) 608-2238 - Free Shipping Over $199USD in the US and Canada

700 Tenere High Fender Kit Install

This video is a combination of the previous part 1 and part 2 videos.

Some people love the look of the factory low fender on the Yamaha 700 Tenere, not us, we much prefer the more aggressive look of the high supermoto style fender! Whether you like high fenders just for the look or because you don't want the front wheel balled up when riding in sticky mud, we have you covered!

Our T7 high fender kit's crown jewel is the anodized billet aluminum fender adaptor/brake manifold. This piece looks killer and serves 2 important functions:

-The T7's rad is very close to the front wheel so you can't simply bolt a fender to the four threaded holes on the bottom of the lower triple clamp. Even using a short supermoto fender, the back of the fender hits the bike's rad guard. Our bracket has an offset bolt pattern that moves the fender ahead so it clears the rad guard.

-There is one front output fitting off the bike's ABS module but we have two brake calipers. Our bracket doubles as a 1-2 manifold to split the hose from the ABS module into 2 separate hoses; one to each caliper eliminating the dangerous stock over-the-front-wheel brake hose arrangement.

The best thing about the T7's factory low fender is that the upper section is bolted to the fork guards rather than being one big piece like seen on most other low fender equipped bikes. This means we can simply remove the fender and retain the factory fork guards. This results in a lower cost kit, easier install and a factory look!

Our kit also features three high quality braided stainless-steel brake lines from Galfer; one of the industry's best brands!

Your kit includes:

-Anodized billet aluminum fender adaptor/brake manifold. Available in Black, Red or Blue

-High quality braided stainless-steel brake line and hardware from Galfer

-Powdercoated aluminum fork guard cover plates

-All required fasteners

-Camel ADV decals

-The fender itself is NOT INCLUDED! Why? Several reasons:

-Shipping our kit without a fender is much more affordable for customers.

-Fenders are bulky and require a much larger shipping box than the conversion parts on their own.

-There are several styles and colors to choose from so it's difficult for us to stock all the options

-We buy fenders at near retail prices. In most cases, our cost to purchase fenders is higher than our customers' local price.

All that been said, in the future, we may stock one fender style in a few colors just in case you really don't want to source your own.

Fender info: Due to the short distance from the bike's triple clamp to the rad guard and the overall size of the factory fork guards, we recommend using one of the following fenders:

-Acerbis Universal SuperMoto fender is the easiest to fit and it looks great. Available in Black (204039001), White (2040390002), Red (2040390227) and Blue (2040390211)

-UFO Universal Supermoto is a good option too. Black (PA01029-001), White (PA01029-041), Red (PA01029-070) and Blue (PA01029-089)

Other articles:

Hell's Gate Moab - 700 Tenere

Hell's Gate is an optional obstacle on the Hell's Revenge trail in the Sand Flats Recreation Area. This alternate section is a steep, V notch with multiple ledges and if you're really lucky, the rock is covered in sand too!

We rode this track during the Dirt Circus ride in March 2022. My friend Charles was there on his KTM 500EXC and Overkill Andy of Heavy Enduro fame was there on his Yamaha T7 as well.

Follow us on Facebook, Instagram, and YouTube to see more of our trips! 

2022 Desert 100 Race - Yamaha 700 Tenere

After two years of COVID cancelations, the Stumpjumper's Desert 100 was a go! 2022 was the 50th anniversary of this iconic race and it had a record turn out.

This was our 8th time racing in the ADV class. The course is a grind, not particularly difficult but it is relentless. The track is covered in baby head rocks, silt, sand and whoops. There is no opportunity to sit and cruise along, it give you no chance to rest. The DNF rate is 30-50%. 2022 was the dustiest event I've ever been to. The first couple miles had people cruising along in first gear until the dust cloud started to let up.

Check out the previous ADV class races on our channel! More updates available on Facebook & Instagram! 

T7 Camel Tank Install

Since the 700 Tenere was officially announced in late 2017, it’s created quite a stir in the adventure bike community. Boasting a great list of features and specs this bike seems ready to conquer the ADV world! However, as the saying goes, “When you’re exploring, you can never have too much water unless you’re drowning or enough gas unless you’re on fire!”.

We can’t help you with the water but we definitely can with the fuel. Placed on the left side of the bike, opposite of the exhaust will sit your Camel Tank. Occupying otherwise unused space, the tank adds 5 Litres (1.3 gal) of extra fuel to your capacity for a total of 21 litres. That's an additional 80-120 km (50-75miles) of extra fun before you need to start looking for a fuel station!

Like the rest of the Camel Tank line, the CT-T7 is roto-molded (no seams to leak or split) from extremely durable XLPE plastic. Our brass inserts won't wear out or cross thread so you can be sure your tank will last the life of your bike! All the Camel Tank kits come with an anodized, CNC machined, billet aluminum fuel cap.

Compatible with the following panniers systems:

-OEM Yamaha pannier racks

-SW Motech Pro

-Outback Motorteck symmetrical (we have not tried the asymmetrical yet)

-Adventure Spec soft bag racks (require 10mm spacers and longer bolts)

*List will grow as we confirm fit with more pannier systems.

Features:

-Holds 5 litres/1.3 gallons

-Fuel is automatically transferred from the auxiliary tank to the main tank

-Keeps fuel weight low and close to the bikes center line

-Leaves your rear rack free for a top box or duffle bag

-Includes tethered fuel cap

-Available in black or translucent

*All extra fees such as taxes, duties, tariffs, brokerage, etc are not included in the purchase price. Customers are wholly responsible for payment of these fees!*

*MOTORCYCLE NOT INCLUDED* (Yup, apparently this footnote is required, we've had questions)

Catch more product install videos on our YouTube channel! :)

Yamaha T7 Vented Oil Funnel

A quick video showing the AKT threaded and vented oil fill funnel for the Yamaha T7.

 Come adventure with us on Youtube, Facebook, and Instagram! :)

Heat Shield Install Norden 901

We're happy to announce that our KTM 790/890 shock heat shield is compatible with the exciting new Norden 901! Protect your bike's shock from excessive heat caused by it's proximity to the large (and very hot) catalytic convertor!

Ride with us on Facebook, Instagram, and Youtube! :)

1FC Install Norden 901

We're happy to announce our 1 Finger Clutch set-up for the Norden 901! Lighten your clutch lever pull by up to 30%! Easy install, easy set-up!

Keep up on Facebook, Instagram, and Youtube! :)