Fits: 2019-Current Yamaha 700 Tenere (Standard, Extreme, World Raid and World Raid)

2025 Tenere compatible High Exhaust Kits *expected* to be available July 7-11th

Yamaha T7 High Exhaust Kit - Rally Bend: Elevate Your Ride!

The Yamaha 700 Tenere has so much to love, but its stock exhaust? That’s a different story. It’s a bit of a Dr. Jekyll and Mr. Hyde situation. Sure, it looks and sounds great, but it’s positioned low and wide, hanging off a long exhaust hanger welded to the subframe. When the bike takes a tumble on the right side, the hanger can bend, causing the muffler to grind into the swingarm. If you don’t bend it back before riding again, the steel muffler can gouge into the aluminum swingarm (check out the photos). After enough falls, you could even crack the hanger at the subframe.

Having dealt with this frustrating damage ourselves, we created a solution. The Rally Bend High Exhaust Kit raises the muffler up much higher and closer to the bike’s centerline, protecting it from harm. To make this work, we designed a new link pipe and a shorter bracket, drastically reducing leverage on the hanger by about 50%. Now, your exhaust stays safe even when the trail gets rough.

Kit includes:

• 304 stainless steel "Lobster-Back" link pipe with wire heel guards for rider and pillion
• CNC billet 6061 aluminum clamp that’s anodized for durability. The patent-pending bracket is easy to install and shortens the hanger for greater protection.
• Optional stainless muffler that’s lightweight and durable
• All necessary fasteners, springs, exhaust clamps, graphite seal, and Camel ADV decals.
  
• Signal Light Heat Shield

Features:
- 2.1kg/4.5lbs lighter than the stock muffler and link pipe
- Compatible with most pannier racks
- Easy installation with basic hand tools
- No re-jetting or remapping needed

Pannier Compatibility

• Yamaha OEM
• Touratech Zega
• SW Motech PRO
• Ride ADV Solo racks
• Rally Raid soft bag plates
• ADV Spec soft bag plates (with 17mm spacers and longer bolts)
• 2nd Gen Outback Motortek racks (not compatible with their "High Exhaust" specific racks)
• Tusk
• Mosko Moto Reckless series
• Giant Loop
  
• Kriega OS Base

Important Compatibility Notes:
- The OEM and Akrapovic mufflers are not compatible with this kit.
- Yamaha's GYTR rear fuel tanks are not compatible with this kit.

Aftermarket headers: They can be used as long as it has the same outlet diameter as the OEM. Some brands, like Akrapovic and Scorpion, have a different outlet size, and they are not compatible with other link pipes (like ours). Dominator and Leo Vince headers are compatible with our high exhaust set-up.

If you’re ordering a kit without a muffler: consider pairing it with a Black Widow SC30H or UN30H. We’ve also found Max Torque Cans to be a great fit with our kit.

Optional: Add a 51mm Spark Arrestor to your order for extra peace of mind!

Update: Our standard mufflers are back in stock! These new stainless steel mufflers come with a black painted end cap, replacing the previous carbon fiber version. They sound amazing, are built to last, and now attach via a clamp rather than springs.

Looking for the Enduro Bend Exhaust instead? Click here!

Important Notes:
- OEM and Akrapovic mufflers are not compatible with this kit.
- Yamaha's GYTR rear fuel tanks are not compatible

No Muffler? No Problem!
If you’re ordering without a muffler, consider the Black Widow SC30H or UN30H. Universal mufflers from Max Torque Cans are also great options that fit our kit perfectly and offer excellent quality.

Optional Add-On:
Consider ordering a 51mm Spark Arrestor with your exhaust kit.

Important Tail Tidy Tip:  
If you’re using a Tail Tidy, we recommend swapping out the OEM incandescent signal lights for smaller LED units. The heat shield provided in the kit won’t fully protect the larger OEM signals from exhaust heat, which can cause them to melt. The OEM signals are fine if you’re keeping the original tail section.

Note to International Customers: Additional taxes, duties, and other fees are not included in the purchase price.

(Motorcycle not included – yes, this has come up before!)

Patent Pending Hanger Bracket – Designed for the Toughest Rides

 Intro Video:

Installation Video: