Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount
Camel ADV KTM 790/890 ADV Neck Brace broken headlight mount

KTM 790-890 ADV Neck Brace

$79.00 USD

Fits KTM 790/890ADV (2019-2024) - NOT COMPATIBLE with the Norden 901!

The KTM 790/890 ADV has been a solid performer since its launch in early 2019. There's tons of cool new tech on the bike that hasn't been seen on an ADV bike from the Austrian brand before. Unfortunately, the designers stuck with the weak, problematic headlight/gauge cluster mounting setup on the 1090/1190/1290 line. 

Everything ahead of the steering stem hangs off four little metal posts welded to the bike's head tube. The lower support bars the designers added to the 790/890 have done little to beef up the mounting points. The 790/890's headlight set-up is quite heavy. Add to that the gauge cluster, windscreen, lower wind deflectors, signal lights, etc, and you have a lot of weight hanging off these weak mounting points.

Over rough terrain, these posts see a lot of stress and eventually snap off. This is a problem for several reasons. The broken posts must be welded back onto the frame, leading to less-than-ideal backwoods repair jobs (see welding pic below). Another issue is the bike's immobilizer system resides under the headlight. When the headlight assembly snaps off, the wires of the immobilizer can be damaged, leaving you with a broken mount and a dead bike.

The Camel ADV 790/890 Neck Brace supports the four troublesome mounting posts by tying them together and attaching them to a mounting tab behind the bike's head tube. This keeps the posts from flexing and breaking off.

The 790/890 Neck Brace is made from 11ga 304 Stainless Steel powder-coated for a great look and excellent durability. Its minimalist design provides all the strength you need while keeping the weight as low as possible. Installation takes only a few minutes. 

 

*International Customers: (outside the US and Canada)
All extra fees such as taxes, duties, tariffs, brokerage, etc are not included in the purchase price. Customers are wholly responsible for the payment of these fees!




You may also like

Customer Reviews

Based on 19 reviews
89%
(17)
11%
(2)
0%
(0)
0%
(0)
0%
(0)
I
Ian Carlson
Great design, perfect fit

I have a number of Camel ADV products, and like usual, this fits perfect. Love the simple to install design and no longer have to worry about breaking the front end off my new bike. I have seen in person what happens if you ride hard off-road without these, my riding friend had to limp out of Colorado with a bunch of zip ties holding his on.

J
John Ambroziak
Perfect fix!

By the time I decided to investigate the reason for my shaky headlight cluster, I discovered that one of the upper attachments had sheared off, but this brace secured everything perfectly, and appears to prevent any further problems. Given the bike’s weak design in this regard, I would recommend you do it preemptively!

J
John Ambroziak
Perfect!!

Headlight assembly was shaking around, and I finally realized that one of the upper screw mounts had sheared off. Installes these braces and it’s now solid as a rock. Wish I had done it sooner! Thanks Camel.

G
Gary
Brace yourself

I really like the quality of the neck brace.
Installed on my 890R.
Why buy cheap quality elsewhere?
It’s your pride and joy, add some insurance against potential problems when you are in the middle of nowhere.
Easy install and looks great.
Thanks Camel!

r
rene medina
Looks and fits well

This was a breeze to install. Doesn't interfere with any of the wires or cables. By the looks of it this will hopefully protect my investment in this bike. The cost of this bracket is a lot cheaper than the alternative.

123